Gas Geyser to Electric Conversion in Islamabad & Rawalpindi
Commercial &
Resdential Services
We’ll make sure you’re getting the right service to meet your needs, not ours.
Professional convert gas geyser to electric in Islamabad
Gas pressure problems, inconsistent supply, and safety concerns are now common in many Islamabad sectors. In older areas like G-7, F-6, and Satellite Town, low gas pressure often means no hot water during peak hours. That’s where gas geyser to electric conversion Islamabad becomes a practical solution instead of replacing the entire unit.
At Smart FixUp, we handle professional convert gas geyser to electric in Islamabad by first inspecting your existing geyser body, internal tank condition, and mounting. We don’t rush straight to installation. Our technician checks the electrical load capacity, wiring thickness, earthing point, and circuit breaker rating before recommending a heating element size. This step is critical because improper conversion can damage wiring or cause repeated breaker trips, After conversion, the geyser can run on gas when pressure is available and switch to electric heating when gas supply drops, without replacing the unit
For homes in Bahria Town, DHA, and Gulberg Greens, wiring usually supports electric conversion smoothly. In older houses, we clearly explain upgrade requirements before proceeding. After conversion, we test the thermostat response, heating time, and safety cutoff so you get stable hot water without gas dependency.
What Is Gas Geyser to Electric Conversion kit ?
A gas geyser to electric conversion kit is a practical add-on that allows your existing gas geyser to work on both gas and electricity. It does not replace the geyser and it does not cancel the gas function. Instead, it adds an electric heating system inside the same unit, so you can switch between gas and electric whenever needed.
On site, what we usually install includes a heating element, adjustable thermostat, proper heat-resistant wiring, and a dedicated circuit breaker for safety. In simple words, gas remains your primary source, and electricity becomes a reliable backup. This setup is very common now in Islamabad, especially where gas pressure drops in winter mornings or supply is completely off at night.
In older sectors like G-7, F-6, and I-8, wiring condition matters a lot. We first check whether the existing electrical load can safely handle a 1500W or 2000W element. In newer societies like Bahria Town, DHA, and Gulberg Greens, load capacity is usually better, so conversion is smoother.
This conversion makes sense when the geyser body is in good condition, but gas availability is unreliable. It’s a cost-effective solution compared to full replacement and keeps your hot water running without daily frustration.
Let's Discuss about your gas to electric conversion kit Work Today
Is Gas to Electric Geyser Conversion Safe?
Gas to electric geyser conversion is safe only when it’s done correctly on site, not as a shortcut job. Most safety issues we see come from improper wiring, no earthing, or installing a high-watt element without checking the load first. Before any conversion, Smart Fixup team physically inspect the geyser body, gas valve condition, and water connections, because mixing electricity and water without checks is risky.
In areas like F-10, G-11, and I-10, many houses still have older internal wiring that cannot safely carry a 2000-watt heating element. In such cases, we either recommend a lower watt option or advise a wiring upgrade before proceeding. In DHA Phase 2, Bahria Enclave, and Gulberg Greens, electrical infrastructure is usually stronger, but we still test load capacity and earth continuity never assumed safe.
Proper earthing, a dedicated MCB, and heat-resistant wiring are non-negotiable. Without these, the geyser can trip breakers repeatedly, damage the heating element, or even cause electric leakage through the metal body. After installation, we run both gas and electric modes separately to confirm thermostat cutoff, heating stability, and water leakage prevention.
When handled by trained technicians with post-conversion testing, this setup is reliable and safe for daily use. Unsafe conversions only happen when safety steps are skipped.
Our Gas to electric conversion Process
To make the process easy to understand, here’s how the gas geyser to electric conversion is handled step by step on site. This is the same method we follow across different homes and societies, without shortcuts.
Step 1: Geyser Condition Inspection
We first check the geyser tank, burner section, and water inlet/outlet joints. If the body is weak, internally rusted, or already leaking, we clearly advise not to proceed. Converting a damaged geyser is a safety risk.
Step 2: Electrical Load & Wiring Check
Before installing anything, we test how much electrical load your existing wiring can safely handle. In areas like PWD Housing Society and Ghauri Town, this step often decides whether a 1500W or 2000W element is suitable.
Step 3: Heating Element Installation
A sealed electric heating element is installed inside the geyser, ensuring proper insulation to avoid internal leakage or short circuits.
Step 4: Thermostat & Safety Setup
We install and calibrate the thermostat, add a dedicated MCB, and confirm proper earthing to protect against overheating and electric shocks.
Step 5: Dual-Mode Testing
Finally, we test both gas and electric modes separately, ensuring smooth switching and stable heating before completing the job.
Hire Smart Fixup’s trained experts in Islamabad today! Let us handle this complex process professionally and ensure you have a dependable hot water system for years to come.
Average Cost of Gas Geyser to Electric Conversion Services in Islamabad
The average cost of converting a gas geyser to electric depends on multiple factors including the geyser tank size, client preference, and the capacity of the heating element. At Smart FixUp, we install high-quality Italian-made heating elements with a 6-month warranty for reliable, long-lasting performance. For a 1500-watt element, the cost typically ranges from PKR 8,000 to 9,000, while a 2000-watt element is priced between PKR 9,500 and 11,000.
In smaller homes or apartments in G-7, F-8, and I-9, a 35-gallon geyser generally heats efficiently with a 1500W element, but if clients need faster hot water, we upgrade to a 2000W element. Larger geysers, like 55-gallon tanks in Bahria Town Phase 4, DHA Phase 3, or Gulberg Greens, usually require a 2000W element for optimal performance. In some cases, customers prefer two 1500W elements to reach the desired heating speed without overloading the wiring.
Other cost factors include existing wiring conditions, safety upgrades, MCB installation, and proper earthing. Our technicians inspect every home, from Trade Mark Centre, Blue Area, and Centaurus Mall to residential sectors like I-10, F-7, G-13—to ensure the conversion is safe, efficient, and tailored to your household needs, making your geyser dual-functional with both gas and electric heating.
Areas We Serve in Islamabad & Rawalpindi
At Smart FixUp, our gas geyser to electric conversion service covers a wide range of sectors and major residential areas in both Islamabad and Rawalpindi, ensuring fast, reliable support right at your doorstep.
In Islamabad We provide services across G-5, G-6, G-7, G-7/2, G-8, G-9, G-10, G-11, G-12, G-13, G-14, G-15, F-6, F-7, F-8, F-9, F-10, F-11, I-8, I-9, I-10, I-11, I-12, I-13, I-14, H-8, H-9, H-10, H-11, as well as major societies and points including DHA Islamabad (Phases 1-3), Bahria Town Islamabad (Phases 1-8), Gulberg Greens, Blue Area, PWD Housing Society, Bani Gala, Safa Gold Mall, Centaurus Mall, Giga Mall, Karachi Company, and Monument.
In Rawalpindi Our team covers all key areas including Saddar, Chaklala, Satellite Town, Scheme 3, PWD Housing Society, Bahria Town Rawalpindi (Phases 1-5), Cavalry Ground, Askari 1-14, Westridge, and major commercial hubs.
No matter where you are in Islamabad or Rawalpindi, our certified technicians ensure safe, professional, and timely conversion from gas to electric for your geyser, giving you peace of mind and uninterrupted hot water.
Why Choose smart Fixup for Gas Geyser to Electric Conversion Islamabad
- Experiences Professionals
- Customer Satisfaction Guaranted
- Police Verified Experts
- 60 Mins Arrival Time
- Affordable Pricing
- and Reliable After Services Support
Frequently Asked Questions
How long does the conversion take?
Most gas to electric geyser conversions are completed within a few hours in Islamabad and its near by areas, including inspection, installation, and safety testing.
Do you offer same-day conversion service?
Yes, we provide same-day service in Islamabad & Rawalpindi for urgent gas geyser convert to electric needs.
Will the converted electric geyser work efficiently in winters?
Absolutely. With the right heating element and thermostat setup, the converted geyser provides reliable hot water year-round, even during cold Islamabad and Rawalpindi winters.
Is it worth switching from a gas geyser to an electric water heater?
Yes, especially if your home faces low gas pressure, frequent shortages, or safety concerns. An electric geyser provides consistent hot water, easier control, and reduced maintenance risks.
Do you provide service in all areas of Islamabad and Rawalpindi?
If your AC is not cooling properly, making strange noises, leaking water, or emitting bad odors, it likely needs repairs. Higher energy bills can also indicate an issue.
Do you provide AC maintenance contracts for offices and commercial buildings?
Yes, we offer AC maintenance contracts for offices, commercial buildings, and businesses in Islamabad. We provide customized maintenance plans based on your needs, whether monthly, quarterly, or yearly.
Can a gas geyser be converted to electric?
Yes, a gas geyser can be converted to electric using a professional gas geyser to electric conversion process. Smart fixup certified technicians install a suitable heating element, thermostat, and safety wiring to ensure reliable hot water.
How much does it cost to convert a gas geyser to electric in Islamabad & Rawalpindi?
Costs depend on the heating element and installation complexity. A 1500W Italy element ranges from PKR 8,000–9,000, while a 2000W element costs around PKR 9,500–11,000. Wiring upgrades and safety enhancements may slightly adjust pricing.
Islamabad and nearby areas
- Sector -F-6
- Sector -F7
- Sector -F8
- Sector -E7
- Sector -G6
- Sector -G8
- Sector -H8
- Sector -i11
- Sector -G9
- Sector -G10
- Sector -G11
- Sector -G13
- Sector -F10
- Sector -i9
- Sector -G7
- Sector -i12
- Sector -i8
- Sector -i10
- Sector -E9
- Sector -E10
- Sector -H10
- Sector -H9
- Sector -F9
- Sector -H13